Get the Best Result out of your Sound System with This Top Guide

Did you know that with a few simple adjustments, you too could be getting crisp highs, deep bass, and nice mid-levels? Here’s what you need to know.

Choose a Room with Good Acoustics

A speaker will create the foundation for you to have a good level of audio output. Room acoustics will also play a part as well. It doesn’t matter whether you want to hook up a record player or whether you want to have a great surround sound system because there really are so many options out there for you to explore, simply in the room. If you have a room with a lot of hard surfaces, such as tile or wood then this can create a lot of sound reflection. Vaulted ceilings are not ideal either. This will give you a bad level of bass production, along with sharp highs and blurred imaging sometimes. If you want to help yourself here, then it would be wise for you to soften the room up. If you do this too much, then you may find that your sound begins to feel unnatural. It’s hard to compensate for a high ceiling, and other than removing your equipment to another room, there’s not much you can do.

Place your Speakers Properly if you Can

Every room will have a resonant mode. This can accentuate or amplify certain frequencies. This will, of course, depend on the overall width, length, and height of the room. Where possible, you need to avoid having the listening spot directly in the middle of the room. Dropping a subwoofer wherever it is going to fit is also a bad idea. If you do this then you may have bass which sounds boomy. For stereo, you need to put your speakers on stands. If you can raise the speakers around 5ft then this will really boost your fidelity, whether you are sitting or standing. Ensure that every speaker is mounted properly as this will stop any vibrations from introducing a sound that is not wanted. If you want to source some audio technology then make sure that you check out Focal powered by Naim.

Finding That Sweet Spot for your Sound

The term “location” is essential if you want to make the most out of your audio equipment. If you are standing to the side of your speakers then this won’t be your sweet spot. Ideally, you have to make sure that the left speaker and the right speaker make a triangle. Once you have set your triangle, you then need to angle them so that they are aiming at the sweet spot. This will help you to make the most out of your system and it will also help you to get the best sound. If you happen to be sitting or standing, move one step forward and see how the sound changes. Little things like this can help you to really transform your system and you would be surprised at what a difference this can make to your overall experience.

Categories: Internet